This website is using cookies
By using astropackaging.com you agree to our use of cookies.
×
Astro Packaging

Contact Support at 800 642-7876

×
 x 

0 Products
No image set

Liberty Series - Bottom Load Case Packer

Automatic Packaging Machine: Bottom Load Case Packer
Minimum Case Size: 8 x 5 x 6 in.
Maximum Case Size: 18 x 13 x 15 in.
Description

Astro Packaging Liberty Series Bottom Load Case Packer

Astro Packaging’s Liberty Series™ Bottom Load Case Packer is built with a unique design where compactness and flexibility are a concern. The bottom load case packer machine is a good fit when your product must be kept upright when case packed and drop packing is not an option. The Liberty Series bottom load case packer can run up to a maximum speed of 15 cases per minute.

The operation of the Liberty Series bottom load case packer is simple. A knock down flat case is pulled off the case hopper via vacuum, and opened by an opposed vacuum cup arm thus pulling the case open and holding it in place over the load station. Product is accumulated into its proper pack patter and then pushed into the waiting empty case into the bottom of the case. The case bottom flaps are closed and filled case is moved to the case sealer. The case is pushed into the integrated case sealer where remaining flaps are closed and sealed by either pressure sensitive tape or hot melt glue. Due to the nature of the Liberty Series bottom load case packer's design, case discharge is usually higher than normal line heights. We can remedy this by using the optional case “lowerator” which will lower the case down to a height that matches your production line using a minimal amount of floor space.

Liberty Series Bottom Load Case Packer Standard Features:

  • Power coated steel frame (medium gray.)
  • Horizontal indexing case magazine.
  • Positive case opening via opposed vacuum cups.
  • Stainless steel, plated, and/or approved plastic contact parts to product.
  • Programmable logic control.
  • Color operator interface.
  • Ethernet IP communication.
  • NEMA 12 wiring with 24 Volt DC controls.
  • Guarding with monitored safety circuit.
  • Speeds up to 15 cases per minute.
  • Non‐lube service pneumatic components.
  • 480 Volts AC 3‐phase 20 amp main supply (other voltages are available.)
  • Quick and easy changeover to meet your production schedule.
  • A cost effective solution.
  • Small footprint.

Optional Features for the Liberty Series Bottom Load Case Packer:

  • Single to multi‐lane “Laner.”
  • Line combining.
  • Stainless steel construction with NEMA 4X electrical
  • Hot melt case sealing.
  • Pad insertion.
  • Machine built opposite hand, or in a U‐shape configuration.

Reviews

There are yet no reviews for this product.
×

Pop Up Panel

Here is the pop up panel you can use to promote any product or products that you think your customers should see at the very bottom of the website. You can use 6 different modules positions between intro-1 and intro-6.

215,00 €

FIND OUT MORE BUY TODAY!


TOP