The post TC500 Operator’s Panel & CPU Board appeared first on Astro Packaging.

The post TC500 Power Board appeared first on Astro Packaging.

The post TC900 Operator’s Panel & CPU Board appeared first on Astro Packaging.

The post TC900 Power Board appeared first on Astro Packaging.

The post TC1300 Power Board appeared first on Astro Packaging.

The ET4 hot melt pattern controller is a microprocessor-based, four event timer, that controls glue-gap or stitch adhesive patterns at fixed line speeds. The ET4 accepts two trigger inputs and controls output to two independent applicator valve groups. One pattern setup for each valve group is retained in memory when power is off.

The ET4 glue pattern controller controls adhesive deposition in a wide variety of fixed speed product assembly and packaging applications. Typical applications include carton and case sealing, pallet load stabilization, cap lining and labeling. The pattern controller directs applicators to apply adhesive according to a programmed four event pattern setup. An event is an individual glue or gap occurrence in a pattern. Each glue event may be stitched, resulting in pattern versatility and adhesive savings.

The ET 4 controls one or two independent valve groups. A valve group consists of up to four E 100 or M 100 style valves, or up to sixteen E900 style valve modules. Input signals trigger the ET4 to activate the pattern, transmitting output power to the valve groups. Two timing modes; Standard (0.001 to 999.9 milliseconds) and high resolution (0.l to 999.9 milliseconds) allow more precise control of event duration.

Programming and adjusting pattern setups is simple with convenient toggle switches. In addition the ET4 trigger skip function allows the timer to interrupt the deposition after a selectable number of triggers, then resume gluing at the user’s preset preference. A complete pattern control package consists of the ET4 and one or two photo-eye sensors. For increased pattern accuracy, an HD1 or HD2a Head Driver should be included.

ET4 Glue Pattern Controller Features:

• Two timers in one: Controls two independent valve groups from two separate inputs.
• Simple toggle switch programming and operation.
• Stitch patterns for adhesive cost savings.
• On the fly adjustment of any pattern event.
• Power-off memory for one pattern setup.
• Program lock security.
• Optically isolated circuits for electrical noise immunity.

The post Astro ET4 Pattern Controller, 4 Events appeared first on Astro Packaging.

The ET-9 must be connected to a properly grounded circuit and installed in accordance with appropriate local electrical codes. Failure to properly connect this equipment can result in personal injury or damage to the equipment Astro Packaging will not be held liable for injuries or damage, whether direct or indirect, caused by use or misuse of this equipment.

ET-9 Event Timer Overview:

This solid state, microprocessor based timer is easy to operate. The user selects one of four dispensing head groups and adjusts the time event duration for a glue or gap pattern for this head group. The event sequence is initiated by an external trigger. ET-9 will accept up to 9 glue or gap events per head group and provides stitch capability during any glue event. Each event pattern is switch selected, providing 1.0 millisecond resolution and ~0.5 millisecond accuracy and repeatability. Nine complete pattern arrangements can be stored for instant recall and set-up changes. ET-9 also provides input, output and power isolation, eliminating problems associated with system ground/neutral, floating voltages and noise triggering.

ET-9 Pattern Controller Features:

• All solid state microprocessor based electronics.
• Simple toggle switch programming procedure.
• Independent programming of all 4 head groups.
• Two input triggers for separate event sequence initiation.
• Selection and adjustment of any head group program while the system is running an event sequence.
• A self test is performed when processor is powered up.
• A 4 digit time display (9.999 seconds)
• An LED display for dependability and easy viewing
• Function head test switch
• Control of on-off function for motors and solenoids
• Control of time dependent functions of a parent machine
• Five year (power off) memory data retention

The ET-9 will operate with any Astro Packaging Applicator Head. It has an internal 24 WC power supply which can be used to switch a 24 VDC solenoid valve. The ET-9 can also be used with Nordson® or Graco/LTI products. (A n external 24 V supply may be required to power multiple solenoid valves).

The post Astro ET9 Glue Pattern Controller, 9 Events appeared first on Astro Packaging.

The CH42-T Hot Melt Pattern Control is a four event speed tracking controller combining the features of the ET4-T Pattern Controller, with the power of an HD2A Driver. Both the hot melt pattern controller and head driver support two independent inputs and two independent outputs. The CH42-T hot melt pattern controller is well suited for one or two output, variable speed applications, with high-speed and high-precision requirements.

The CH42-T Hot Melt Pattern Controller automatically maintains constant pattern length at varying line speeds receiving line speed input from a Tachometer Generator. The head driver enhances the speed and accuracy of electric glue guns by increasing the opening and closing speeds. The CH42-T can open an electric valve in 2 to 4 milliseconds, hold it open for as few as 1 to 2 milliseconds, and close in 2 to 4 milliseconds. Electric glue guns can cycle open/close up to 120 times per second.

The CH42-T hot melt pattern controller is packaged in a dust proof and water resistant metal case rated for temperatures up to 150°F (66°C). Internal wiring options are available on convenient terminal strip.

The post Astro CH42 Pattern Controller, 4 Events appeared first on Astro Packaging.

Reliable Dispensing Technology

The TPC-9 Pattern Controller from Astro Packaging, used in conjunction with your hot melt adhesive glue gun, accurately controls glue output on your application. For reduced waste and more consistent output, users can program a custom pattern with up to two glue events, or the TPC-9 can also be set to economy mode. When set to economy mode, the TPC-9 will automatically create a glue stitch pattern and save 30-50% on your glue usage. Both utilize adhesive more efficiently while still ensuring a strong bond.

The TPC-9 hot melt pattern controller is available in 24VDC or 120VAC output signal. The TPC-9 pattern controller also gives you the flexibility to store up to 9 programs of different glue patterns, saving time when running different box sizes and glue patterns. The test mode feature of the TPC-9 is available for maintenance and/or troubleshooting.

TPC-9 Pattern Controller Features:

• Single input/output, 2 event hot melt pattern controller.
• ‘Economy Mode’ setting for simplified glue stick patterns that can cut glue usage by 30-50%.
• Accurate adhesive output for consistent quality.
• Can store up to 9 different program settings for multiple sized products and glue patterns.

The Astro Difference – Switch to Stitch and Save

Replace a 6” continuous adhesive bead with a 6” skip pattern, and you cut adhesive consumption by up to 50%. It’s simple, and the savings are certain. The TPC-9 also goes the extra mile with a built-in algorithm that always ends an event with glue when using a stitch pattern so the edge is never “skipped.” Make the switch today and see the savings for yourself.

The post TPC-9 Hot Melt Pattern Controller, 2 Events appeared first on Astro Packaging.