|
ET4-T Pattern Controller |
|
|
 Four Event Speed Tracker - The ET4-T Pattern Controller offers high precision control of two independent adhesive
patterns at varying line speeds. With input from a remote tach generator, the
microprocessor based ET4-T maintains constant pattern length by automatically adjusting
each glue and gap event as line speed changes. The power for the internal processor
combined with an extensive array of features equip the ET4-T for the most demanding high
speed production environments.
The ET4-T simultaneously controls two glue patterns for
two independent valve groups. A valve group consists of up to four E100 or M100 style
valves or up to sixteen E900 style valves. A stitch pattern may be selected within the
glue events for lighter deposition and adhesive savings.
A Slautterback Data Beam Photoeye may be added to initiate patterns for each
independent valve group. The ET4-T is capable of initiating a repeat pattern before the
first pattern is complete.
The ET4-T is enclosed in a dust proof, water resistant metal case. Internal wiring
options and interface wiring are available on a convenient internal terminal strip. All
circuits are optically isolated. A complete speed tracking control package includes an HD1
or HD2a Head Driver for increased pattern placement accuracy. The ET4-T and a head driver
are available in a single enclosure in the CG or CH series controllers. To maintain
constant adhesive pattern weight at varying line speeds, an FC1 Flow Controller is
suggested.
Features:
- Two controllers in one: Controls two independent valve groups from two separate
inputs
- Accurate placement of two independent adhesive patterns at varying line speeds
- Speed tracking at up to 3000 fpm (1080 mpm)
- Stitch patterns for adhesive cost savings
- One or two input triggers
- Simple toggle switch switch programming and operation
- On the fly pattern adjustment of any event
- Pattern placement accuracy of ±0.01 in at 450 fpm (±0.5 mm at 270 mpm)
- Head compensation adjustment for electromechanical response time
- Valve group test switch
- Displays current line speed
- Power-off memory for one pattern setup
- Programmable low rate drop out
- Repeat pattern can be initiated before the first pattern is complete
- Program lock security
PHYSICAL
Gasket sealed, dust proof and water resistant metal enclosure meets NEMA 4 specifications
Operating Temperature
32-140 °F 90-60 °C)
Storage Temperature
20-140 °F (-1-60 °C)
ELECTRICAL
Electrical Power Requirements
100-115 VAC, 15 W, 50/60 Hz, or
200-230 VAC, 15 W, 50/60 Hz
Line Speed input
Tach generator must generate 50-300 VDC at maximum line speed
One or two trigger inputs Voltage:5-24 VDC, 4-25 mA
Type:Photoeye sensor; mechanical triggers not recommended
Mode: One Shot:Sequence initiates and completes with 1 trigger input
Duration:Sequence initiates and continues while trigger signal is
engaged
Output switching relays
5-60 VDC, 3 A or
60-250 VAC, 5A
|
PERFORMANCE
Performance Ranges
Event length: 0.01-999.9 in.
(0.5 mm - 9.999 m)
Low rate drop out:5-99 fpm
(2-99 mpm)
Head compensation: 0-99 ms
Resolution and Pattern Accuracy
Resolution Setting Max. Line Speed
0.01 in. (0.5 mm) 450 fpm (270 mpm)
0.02 in. (1.0 mm) 900 fpm (540 mpm)
0.05 in. (2.0 mm) 1500 fpm (810 mpm)
0.10 in. (3.0 mm) 3000 fpm (1080 mpm)
Maximum number of valves per group
4-E100 100-230 VAC
4-M100 100-230 VAC
8-E900 100-115 VAC
16-E900 200-230 VAC
ET4-T Four Event Example with Two Valve Groups
- User sets two glue and two gap lengths in inches or millimeters.
- Two valve group patterns triggered by one or two photo eye sensors.
- Capable of initiating a repeat pattern before first pattern is complete
|
|
|
Need more information? Want to order? Call our toll free number:
¿Necesita más información? ¿Querés compra? Llame a nuestro número gratuito:
|
|
Servicing Slautterback ® equipment and Slautterback ® hot melt units and Slautterback ® replacement parts.
|
Inicio  Slautterback Pattern Controllers ET4-T Pattern Controller |
|
