 The D2-15 temperature control is simple to program. Versatile and compatible with other manufacturer’s hoses and applicators.
The D2-15 Hot Melt adhesive unit is designed with a constant speed direct drive motor / pump combination and adjustable output control. This extremely reliable melt unit holds 15 Lbs. of adhesive. The cylindrical tank design virtually eliminates any possibility of char build up. With an integrated melt fin design to insure consistent pump rates due to the flow through grid design. Capable of 2 hose and 2 applicators, the D2-15 temperature control is simple to operate. Features include alarm settings to insure all zones are running properly.
The cylindrical tank design provides a large opening for ease of filling and cleaning. The melt grid is simple to remove for ease of cleaning.
D2-15 brochure available for download at bottom of this page.
Features:
- Self-diagnostic P.I.D. Digital Temperature Controller with platinum sensor accuracy
- 110/120V and 200/240V configurations fitted with a gear pump with adjustable flow control
- Easily removable access covers completely expose all components for easy maintenance
Specifications:
PHYSICAL
Weight
78 lb. ( 35.4 kg )
Height
20.8 in. ( 52.8 cm )
Width
11.4 in. ( 28.9 cm )
Length
23.6 in (59.9 cm)
Tank Capacity
15 lb. ( 6.8 kg )
Electrical
Power Requirements
115 VAC 20 Amps
1500 Watts Max
Hose Capacity
Up to 2 Hoses and 2 applicators |
PERFORMANCE
Warm Up Time
30-45 minutes
Melt Rate
15 lb/hr (6.8 kg/hr)
Temperature Control Microprocessor
RTD zone Digital microprocessor
150-450 DEG. F (66-235 C)
Recommended Operating Pressure
0-600 psi (0-50 bar)
Maximum Pump Flow Rate
V-675: 100-110 lb/hr (45-50 kg/hr)
Accessories
Air control Kit
Motor
86 rpm pump motor |
|
