|
 All Electric Extrusion Swirl and Fan Spray Handgun - The L5 Handgun is a lightweight manual applicator which dispenses hotmelt adhesives by extrusion, swirl or fan spray methods. Swirl and fan spray applications require the addition of an airline and a simple adapter attached to the nozzle nut.
The standard model (pictured above) may be suspended from an overhead support for down-apply applications with the addition of an adapter. The reverse-entry model also suspends over a workstation for forward or down-apply applications
Designed to reduce operator failure, the L5 features a multi-axis swivel and weighs less than .15 pounds (0.7kg.). The ball swivel increases operator comfort and productivity by allowing continuous gluing in any direction or hand position. A distinctive cool-touch handle keeps operator hand well away from heated components.
For demanding applications, the durable L5 features an impact-resistant molded shell for extended service life. L5 compatible hoses are available in a variety of lengths.
Features:
- Weighs less than 1.5lb (0.7 kg)
- Two finger control
- Safety trigger lock
- Carbide steel needle
- Ball and standard swivel hose/handgun connection
- Quick electrical disconnect
- Cool-touch handle
- Internal trigger activates pump and air for swirl or fan spray adapters (if present)
PHYSICAL
Handgun Weight
1.5 LB (0.7kg)
Gun Swivel
300
Models
Standard
Reverse-entry
Temperature Control
100 RTD sensor
Electrical Voltage
100, 115, 230VAC
Wattage
80 W cartridge heater
*Some melt units may require the addition of a relay to operate this handgun |
PERFORMANCE
Warm-up Time
30-45 minutes
Adhesive Operating Pressure
50-200 psi (3.4-13.8 bar)
Viscosity
Maximum 25,000 cps
Temperature Operating Range
100-400 F (38-204 C)
OPTIONS
- Extrusion nozzles
- Swirl nozzles
- Swirl adapter, standard
- Fan Spray Adapter
- Down-apply extrusion adapter
- Down-apply swirl adapter
- Airline kit
|
HOSES
Voltage
100, 115, 200, 230VAC
Wattage
25 W/ft (7.6 W/m)
Models
Extrusion, no airline
Swirl, with airline
Temperature Control
100 RTD Sensor
Hose Size
9/16-18 JIC female swivel thread fittings
Minimum Bend Radius
8 in. (203mm)
Hose Lengths
4, 6, 8, 10, 12, 14, 16 ft
(1.2, 1.8, 2.4, 3.0, 3.7, 4.3, 4.9 m)
|
Standard down apply
Swirl Adapter |
Reverse Entry
Swirl Adapter |
Extrusion Swirl pattern:
Product Assembly Applications |
Extrusion Manual Extrusion
Cartoning Applications |
|
