|
T750 Temperature Controller |
|
|
 Nine Zone Control - The T750 Temperature Controller is a microprocessor based scanning controller that
regulates up to nine temperature zones in a hotmelt applicator system. A zone is a tank,
hose or head with separate, independent temperature control. Integrated into the control
panel of a Slautterback melt unit, the T750 monitors and controls adhesive temperature in
the tank, and up to four heated supply hoses and adhesive applicators.
The T750 controls temperature based on inputs from RTD sensors located in each heated
component. Temperature values are selectable for both run (operating) and standby settings
plus high and low limits. The T750 offers auto-tuned proportional control of each
temperature set point. it learns the most efficient way to attain a desired temperature
and maintain it accurately. a run-ready light illuminates when all zones are at proper
operating temperature. A visual alarm illuminates if the temperature for any zone exceeds
the high or low limit.
Optional Auxiliary capabilities can be added to the standard T750 which include Audible
alarm, Automatic Power Shut off and Automatic Run to Standby.
The melt unit pump will not turn on until all zones reach run-ready temperature. Relay
contacts are available for connection to a parent machine or other device.
All temperature control settings are easy to program and operate with convenient toggle
switches. The T750 design is based on the reliable, service proven line of Slautterback
temperature controllers.
Features:
- Monitor and control up to nine temperature zones
- Offers more capacity than the T500 at a cost lower than the T1000
- Selectable temperature standby setting reduces adhesive char and degradation during periods of inactivity
- Fahrenheit and Celsius scale selection
- Program and configuration locks
- High and Low temperature limits for each zone
- Run-Ready light and output relay signals the system is up to operating temperature
- Scan display setting shows set and actual temperature of each zone at two-second intervals
- Warm-up thermoswitch provides pump startup protection
- Optional auxiliary control features
- Self test circuit with visual alarm for checking RTD sensor and heater
- Optically isolated solid state relays for electrical noise immunity
- Self-tuning proportional control for each temperature zone
|
|
Need more information? Want to order? Call our toll free number:
¿Necesita más información? ¿Querés compra? Llame a nuestro número gratuito:
|
|
Servicing Slautterback ® equipment and Slautterback ® hot melt units and Slautterback ® replacement parts.
|
Home  Slautterback Temperature Controllers T750 Temperature Controller |
|
