|
HD2A Head Driver |
|
|
 Dual output, high speed electric head driver - The Slautterback HD2a Head Driver is a solid state electronic device which enhances the
performance of electric applicator heads to produce extremely accurate adhesive patterns.
The HD2a increases the opening amd closing speed of the adhesive valve. This translates
into sharper cut off and increased accuracy of pattern placement. The speed and precision
of the HD2a are two times greater than the DC driver.
The HD2a opens a single electric valve in two to four milliseconds, holding it open for
as few as one to two milliseconds. It is capable of firing a valve continuously every 15
milliseconds.
The HD2a supports two independent outputs to applicator valves with inputs from an ET
Series Pattern Controller. Each output can simultaneously fire up to four standard
electric applicator heads or up to eight E900TM Series valves. Standard
electric applicator heads include E100, E100XT, M100, ML400 and S100 heads. The HD2a Head
Driver, combined with a Slautterback ET pattern Controller, satisfies the most demanding
adhesive pattern control requirements.
Features:
- Dramatically improves speed of automatic applicator valves
- Maximum capability of four standard electric heads or eight E900TM Series
valve modules per output
- High precision pattern control with accurate and repeatable placement
- Continuous operation at 15ms cycles
- Selectable output settings to match application
- Two independent outputs to head groups, controlled by optically isolated inputs.
- Pattern registration accuracy of ±0.5 ms or ± 0.05" at 500 fpm
- Serves 100-115 or 200-230 VAC systems
- Built in test fire switch and power supply
|
|
Need more information? Want to order? Call our toll free number:
¿Necesita más información? ¿Querés compra? Llame a nuestro número gratuito:
|
|
Servicing Slautterback ® equipment and Slautterback ® hot melt units and Slautterback ® replacement parts.
|
Home  Slautterback Pattern Controllers HD2A Head Driver |
|
