The Dynatec EZ Hot Melt Glue Nozzle is a one piece nozzle designed for fast removal and replacement. The design allows operators to easily change nozzles without tools as well as quick and easy inspection and cleaning of the nozzle. Large brass nozzle is clearly identified and the size reduces stringing.
Hot melt adhesvie supply hoses are electrically-heated, flexible conduits designed for the transfer of hot-melt material from an adhesive supply unit (ASU) to an applicator (head or handgun). Hoses are heated by resistance heaters which are wrapped around the hose core and covered with a high-temperature insulation. Hose temperature is regulated by the ASU's controller. A sensor located in the hose provides temperature information to the controller.
DYNACONTROL are 1000 psi (69 bar) hoses used to deliver hot-melt material from a Dynamelt or Dynamini ASU to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator). These hoses provide through wiring for power, sensor and chassis ground in the applicator. All DynaControl hoses feature PT-100 RTD sensors.
Wash down hot melt hose models are available. They consist of a standard hot melt hose, made water resistant with the addition of a seamless flexible sleeving, sealed end cuffs and liquid-tight electrical conduit and fittings.
Hot melt adhesvie supply hoses are electrically-heated, flexible conduits designed for the transfer of hot-melt material from an adhesive supply unit (ASU) to an applicator (head or handgun). Hoses are heated by resistance heaters which are wrapped around the hose core and covered with a high-temperature insulation. Hose temperature is regulated by the ASU's controller. A sensor located in the hose provides temperature information to the controller.
GEMINI DYNACONTROL are 1000 psi (69 bar) hoses used to deliver
hot-melt material from a Dynamelt or Dynamini ASU to an ITW Dynatec
applicator (either a dispensing head or a hand-held applicator). These
hoses provide through wiring for power, sensor and chassis ground in
the applicator. All DynaControl hoses feature PT-111 RTD sensors.
Slautterback® & Nordson ® are a registered trademark of the Nordson ® Corporation
ITW/Dynatec ® & ITW/Challenger ® are a registered trademark of the Illinois Tool Works Corporation
Graco ® is a registered trademark of Graco, Inc. & H.B. Fuller ® is a registered trademark of H.B. Fuller, Inc.
